Wilwood
Wilwood Brake Products
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since founding in 1977, Wilwood has developed a substantial matrix of brake components and engineering techniques that allow them to quickly and reliably create brake systems for almost any application. Wilwood's core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.
Wilwood employs approximately 250 people at their Camarillo, California facility. They have on-shelf stock of over 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Wilwood's off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee. Wilwood's engineering department uses the latest computer aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions to the most difficult braking tasks. Wilwood's extensive inventory of proprietary on-the-shelf components permit them to provide very cost-effective solutions to unique brake applications. Wilwood is ISO compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.
Accesspeed is proud to offer Wilwood Brake products to our customers. With our low price match guarantee, you will always find the best combination of price and selection at Accesspeed. Below are some of the great Wilwood products available at Accesspeed:
- Wilwood Calipers
- Wilwood Big Brake Kits
- Wilwood Master Cylinders
- Wilwood Pedals
- Wilwood Proportioning
- Wilwood Pressure Valves
- Wilwood Brake Rotors
- Wilwood Brake Hats
- Wilwood Brake Fluid
- Wilwood Brake Pads
- Wilwood Hubs
- Wilwood ProSpindles
- Wilwood Flexlines
- Wilwood Parking Brake Cables
Suspension & Chassis » Tie Rods, Steering Arms and Links
Tie Rods, Bump Steer, Toe Links, Steering Arms and End Links
What are bump steer kits?
Bump steer kits change the angle of the tie rods to properly align with the instant center. As the vehicle lifts or lowers, so does the steering rack. However, the tie rods do not stay in symmetry, which means the outer tie-rod angle changes, taking it out of instant center. Aftermarket adjustable bump steer kits change the location where the tie rod meets the steering knuckle, allowing tie-rod angles to be properly adjusted and aligned to instant center.
What are tie rods and tie rod ends?
Tie rods “tie” your vehicle's steering rack to the steering arm. The steering arm is attached to the wheel at the knuckle. Tie rod ends are the attachment points. Thus, adjustable aftermarket tie rod ends can improve steering quality and feel, while increasing reliability.
What are toe links?
Toe links keep your tires headed in the right direction and improve handling performance. Aftermarket toe links help reduce chassis deflection under hard cornering.