Wilwood 140-14557 AERO6R 14" Front Race Big Brake Kit, Slotted, Black Anodized, 1997-2013 Corvette

Wilwood 140-14557 Front AERO6R RACE 14" Big Brake Kit With Black Anodized Finish and Slotted Rotors, Fits 1997-2004 Corvette C5 and 2005-2013 Corvette C6

This Wilwood Big Brake Kit from Accesspeed is configured for dedicated road racing when 14.00” / 355mm rotors are required by rules or preferred for weight savings. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series 14.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Brake Kit does not include flex lines. 

Flex lines are necessary to complete the installation of the kit and must be ordered separately #WIL-220-8176 for C5 and WIL-220-9100 for C6. 

*This Brake Kit may require 18-inch or larger wheels for proper fit. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. 

Below is a great video showing How To Install Corvette C5 and C6 Brakes:

Notes

1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov

Scroll to view product options.

Scroll to view product options.

Fits These Applications: